China High quality Stone epoxy adhesive Quotes, Factory, Purchasing, Manufacturers
Home > Products > Stone Adhesive > Stone epoxy adhesive

Stone epoxy adhesive

Brand : MAGPOW

Product origin : China

Delivery time : 25-35 DAYS

Supply capacity : 100 TON/MONTH

[Applicable Scope]
The Stone epoxy adhesive is used for repairing irregular cracks like micro-cracks, (sand holes, chicken patterns, ant roads) and uneven patches on the surface of various stones.

[Performance Characteristics]

The Stone epoxy adhesive is in low viscosity and high penetration. It has strong adhesion and strength after cured.It is abrasion, water, oil, chemical and aging resistant.

[Product advantages]

1.High adhesion and strength, the glue layer is abrasion.
2.Low odor, do no harms to workers;
3.Good age resistance;
4.This Stone epoxy adhesive meet the standard of GB18583, ROHS, it is environmental friendly

[Technical data]

No. Items Technical data
1 Appearance Part A colorless and transparent liquid
Part B
2 Viscosity (mPa•s) Part A 800-1500
Part B 30-80
3 Mix ratio(AB) 5:1
4 Pot life(25℃,min) 10-15
5 Initial curing time(25℃,h) 2-3
6 Shear Strength(RT48hMPa) 7.0

[Curing Time]

Temperature(℃)  Pot life (min) Initial curing time(h)
5-10 20-30 5-8
10-20 15-20 3-5
20-30 10-15 2-3
30-40 5-10 1-2

PS: The time above is based on the mixed glue 600g

1.Slabs treatment
Slabs should be totally dry.
Remove the mud, oil or other purity on the slab surface.

2.Prepare the glue and mix

Mix the glue by A:B=5:1(by weight) completely
Please use up the glue within the pot life. The glue will be fever and is prohibited to use when beyond the pot life. The more of the glue mixed, and the higher of the temperature, the shorter the pot life. If mixed too much glue, please divide quickly to use.
Do not mix the cap of A and B. Please seal the caps anytime in case the moisture and dash from the air.
The plated with big open mouth container is recommend for glue mixing to extend the pot life of glue

3.Spreading the glue

Spread the glue evenly on the surface of slab with scrape back and forth. The recommend using weight is 80-150g/㎡.
For the cracks on slabs, spread glue back and forth to make the glue penetrate completely.
For the big defects on the slab, such as the soil, please remove first, then mix the glue and stone powder to fix it. Polish after cured, then spread the glue.

Please do not use the non epoxy and other slab surface treatment agent, or it will be not suitable for the epoxy glue spreading.

4.Glue solidify
The Stone epoxy adhesive will be initially cured in 2-3 house under room temperature(25℃)It can be proceed to next procedure after 24 hours;If possible, heat up the stone with adhesive to 50-60 ℃ and polish it after 2-3 hours.
Before the adhesive cured, the stone should be placed horizontally and not stacked; after cured, the lubricants such as talcum powder can be applied on the stone surface, to avoid stone adhesion when they are stacked.

5.Clean up
Use the specialized cleaner to clean the apparatus before the glue cured.

[Protection Measures]
For different workers, the glue may irritate the skin, but the product meet national standard GB18583-2008, it is environmental friendly and no harm to human body.
When using this glue, please take the protections as below:
Use the glue in the ventilate environment
Wear the protection cloths, gloves and mask
In case the Stone epoxy adhesive contact skin directly, if any, clean with the soap water
Before mix the glue, open the cap of Part B first, wait for the volatility of the free low molecular materials
If any irritation to the skin, better to change to other jobs.

1.Some facts will affect the performance of the glue as below:
The stone is not dry enough or the air humidity is too high, the stone absorbed the moisture from air
Part A and B was not mixed exactly base on the stipulated ratio Glue mix uneven or not completely
Mixed the apparatus of A and B, the glue is cured in advance The mixed glue was not used up within the pot life
2.In winter and low temperature, the product may form crystal or caking. Just heat up the glue and make the crystal or caking dissolved, this will not affect the glue performance.
3. Clean and wipe the glue on cloth or skin before it cured with alcohol, then flush with soap water. If in eyes, flush with plenty of water and seek for medical cure; if swallowed, do not emetic, drink plenty of egg white or milk, then seek for medical cure immediately.

[Stock and Package]

1.Sealed and stock in cool, dry and ventilate place, stock temperature under 5-40℃. Shelf life one year from the production date, it can be still used based on passing the test when beyond the shelf life.
2.This Stone epoxy adhesive is corrosive goods, keep far away from the heat, fire, sunshine and rain during delivery and stock. In the process of transportation, operate gently, it is prohibited to roll, impact, stress, inversion, and offset
3.Packing size: 120Kg/set, in plastic drum packing; 240kg/set, 1200kg/set, Part A in Iron drum packing and B in plastic drum packing.


[Important Notes]

1.For materials to be bond are different, this may affect the glue performance. Please have a try before plenty use.
2.We solemn promise: we produce the products according to our enterprise standard strictly, we will responsible for the product quality, but not responsible for the operation process.
3.To provide the certified products to our customers, we operate strictly according to Quality systemISO9001 and Environmental management system ISO14001. Our technology suggestions in oral, written and experiment is from our honestly, which can not be our guarantee. Please read the instructions carefully before use, also arrange testing to ensure the glue is suitable for your process and applications.
4We can not control the goods stock & delivery, operate condition and process, we will not responsible for the quality and related lost from the incorrect operations.
5.Any employees from our company can not revise or disregard the terms above.

[Executive Standard]
National Mandatory standard:GB24264-2009

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :